aaron • July 20, 2016 • Comments Off on Easy Steps In Painting Your House
Paint sprayers are incredibly convenient, and they make short work of any bigger painting job. What many people don’t realize, however, is that they can be time-consuming to clean. It’s not just a simple matter of running water through the sprayer and walking away. You have to disassemble and clean the entire unit to prevent it from jamming the next time you use it.
Emptying the Unused Paint
Start by putting the intake hose in a bucket of fresh, clean water. Point the gun into the paint gun and allow the residual paint to return to the can for later use. Stop spraying as soon as the paint starts thinning out with water.
Cleaning the Lines
Point the sprayer into a bucket that will be thrown away and continue to run water through the lines. Continue refilling the fresh water bucket as needed until the spray coming out contains nothing but clean water.
Pieces and Parts
Your paint sprayer has several parts that work together. If any part is coated with dried paint, your sprayer won’t work the next time you need it. Just as running water cannot clean dirty dishes by itself; it also cannot clean your sprayer. Your machine is designed to be taken apart, allowing you to clean every piece the paint must pass through. Using your owner’s manual as a guide, take the sprayer assembly apart. Every piece should be placed in a small bucket of paint or lacquer thinner. Allow these pieces to soak while you take care of the sprayer housing.
Clean the Body
Wearing a pair of protective gloves, pour paint thinner on a rag and start cleaning the body of the sprayer. Over-sprayed paint should be removed while it’s fresh, so the machine will still look like new when you are done. Clean the frame and the body as thoroughly as possible.
Scrub and Rinse
Turn your attention back to the pieces and parts. Using a stiff bristle brush and some rags, inspect every piece for paint and clean it. Rinse each piece in clean water after inspection, and then look it over again. When you have removed all traces of paint, you can should dry it thoroughly and set it on a clean rag for reassembly.
Putting it Back Together
Following the manufacturer’s directions, put your paint sprayer back together. Check all pieces again to be sure they are completely free of paint and dry. Once the unit is assembled, store it in a safe spot with all accessories. Your intake hoses should be safely stored with the sprayer for future uses. If your sprayer did not come with a special storage box, consider buying a box or bag for the hose clips and other attachments. This will ensure that your sprayer is complete and ready for use the next time.
There are many uses for paint sprayers. Whether you are treating a fence or painting a large bedroom, a paint sprayer can make short work of the job. Before deciding if you will roll the paint on or run it through the sprayer, take into account the amount of time it will take to clean the machine. The first time you clean it, the entire process could easily take thirty minutes to an hour. As you become familiar with the machine and parts, however, the cleaning process will require less time.
Painting is not a difficult work, however there are absolutely certain essential issues to consider when you aspire a competent finish. Why don’t we review them below:
Scrub the walls as you start. Do not just twist up with your paint pail and brush. Wash the walls by using sugar soap just before you start unleashing paint all over the place.
Inspect the wall space. Check the condition of the walls before you start. Create a detailed note of any dents as well as splits. These can be fixed using filler from a hardware retail store.
Maintain the airflow moving. Remember to paint at a room with fine air flow. Some paints may include numerous toxic chemical compounds which will bring about allergic tendencies or headaches because of lengthy periods of exposure. Because of this, paint makers are now setting up a substantial hard work to reduce these types of risky organic formula in their products.
Label your leftovers. Frequently you’ll always end up getting some spare paint at the finish of the work. Tag this thoroughly with both the color as well as the area it had been used in. This is sometimes a godsend down the track if repainting is required and you need to color match your previous work.
Do not ever throw aside unused paint. , it is estimated that around much liters
of paint were being thrown away or perhaps kept unused recently. If the paint remains usable, think of donating it to a local community team or a good cause. There are numerous people much less privileged who may have a good utilization for the paint that you simply no longer need.